• 877.677.4327
  • |
  • Customer Service

Frame Instructions: Longhorn Frame

Longhorn Components:

  • (2) Side Rails
  • (1) Cross Bar
  • (1) Universal Seat Mount
  • (1) Foot Bar
  • (1) Pair of Oar Mounts
  • (6) U-bolts
  • (12) Washers and Locking Nuts
  • (1) Frame Wrench
  • (1) Low-Back Drain Hole Seat Note: Seat is packaged separately
NRS Longhorn Raft Frame

Directions

  1. Lay out the frame parts as shown in the image above.
  2. Attach the Universal Seat Mount to the center of the cross bar.
  3. Set the seat and foot bars on the side rails and install the U-Bolts. Add the washers and nuts leaving them loose. If any of the bars need to be repositioned, it may be necessary to remove the U-bolts to make adjustments.
  4. Add seat and oar mounts.
  5. Check to be sure that all of the U-bolts are tight. Periodically check the tightness of all nuts and bolts.