• 877.677.4327
  • |
  • Customer Service
  • NRS Frame Casting Platform
  • NRS Frame Casting Platform (alternate image)

NRS Frame Casting Platform

  (2)   |  Write a Review   |  Ask a Question   |  3 Questions

Item: 93040.01  |  Product Details »

This product is no longer available, but we’ve got more options for you:

Shop NEW Version » Shop Similar Products »
Avoid balancing on that standard or air floor. Be sure-footed on this solid marine-grade platform. Available in two sizes, small and large, to accommodate different boat sizes. The small casting platform is recommended for smaller rafts that would take a 54" wide frame or smaller. The larger size platform is recommended for rafts that would take a 60" wide frame or larger.

Product Reviews

  (2)

Related Videos

  • video: NRS Fishing Raft Frame
    NRS Fishing Raft Frame
    Length:3:28
Material: 1-5/8" 6061-T6 Anodized Aluminum Frame Pipe
Components:
  • 1 - Marine Grade Plywood
  • 4 - NRS Frame Pipes with LoPro Fittings
  • 4 - U-bolts with nuts and washers
  • 2 - Rubber Frame Plugs

video: NRS Fishing Raft Frame

NRS Fishing Raft Frame (3:28)

The secret is out, rafts make great fishing boats! The Fishing Frame has a comfortable seat for the rower and puts the angler up high with the padded Action Seat. Comes standard with a low back drain hole seat and seat bar, a folding Action Seat and Action Seat bar, foot bar, cross bar, two side rails and a pair of NRS oar mounts.

REVIEW SNAPSHOT®

by PowerReviews
NRS Frame Casting Platform - Closeout
 
5.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
5.0

Great addition

By Rakuone

from Teton Valley Idaho

Verified Reviewer

Pros

  • Functional
  • Rugged

Cons

    Best Uses

      Comments about NRS Frame Casting Platform - Closeout:

      I wanted the fishing set up in the video. Ended up building from a Bighorn 2 frame to fit a NRS 140 E. I thought the platform may be too small and I was wrong. This platform is perfect for fly fishing. The stability when standing is far better than going without. Installation is easy and so is removal.

      • Was this a gift?:
      • No
       
      5.0

      Great Product

      By bob

      from western slope, co

      Verified Buyer

      Pros

      • Stability

      Cons

        Best Uses

        • All fishing

        Comments about NRS Frame Casting Platform:

        Added needed stability when fly fishing

        • Was this a gift?:
        • No

        Displaying reviews 1-2

        Back to top

        Do you have questions about this product?

        Get answers from real customers and in-house experts with AnswerBox.

        3 Questions | 7 Answers
        Displaying questions 1-3
        • NRS Frame Casting Platform - Closeout

          Q:

          I have a Bighorn Frame that I would like to make more fisherman-friendly. It has a foot bar that drops from the side rails. Does the casting platform fit this as a "seat bar" if the seat bar is turned up side down? It looks like the fishing seat bar is the same as the foot bar.??
          Asked on 8/21/2013 by Tim, Arkie trout fisherman from Little Rock, AR

          1 answer

          • Staff Reviewer

            A:

            Tim, if you have a 48", 54" or 60" wide frame this will work. If your frame is 66" or 72", it won't. Of course you'll have to spin the LoPros. If you haven't found it, our Frame Part Specs page (look for the link in the More Information box) has lots of measurements on these parts.

            Answered on 8/22/2013 by Clyde from NRS
        • NRS Frame Casting Platform - Closeout

          Q:

          My frame is 60" and specs call for the large. However, I want to be certain that the platform doesn't rub against the walls of my 14' Riken. My friend has a larger boat and it's close. Can you provide a comparison of platform size for small vs. large? Is that the only consideration when choosing size or does it also have to do with bracket formation?
          Thanks in advance!
          Asked on 2/26/2013 by Brian from Boone, NC

          3 answers

          • VERIFIED BUYER

            A:

            Mine did not rub on the tubes.

            Answered on 2/26/2013 by Anonymous
          • VERIFIED BUYER

            A:

                I have the large platform in my raft which is about a foot longer than yours.  Width wise I have had no issues with the platform rubbing on the side of the raft.  I do not have it rigged up right now but have no recollection of it being too close to the sides. From what I can recall there were at least an inch or more on both sides to spare.   
             
            David 

            Answered on 2/26/2013 by Anonymous
          • Staff Reviewer

            A:

            Brian, you can see all the measurements here - http://www.nrsweb.com/frames/Specs.asp?deptid=974&tn=49#CastingPlatform - The curved support arms can swivel a bit to adjust to different width Angler Seat Bars. If the measurements don't fit your boat, call us, 800.635.5202, for custom options.

            Answered on 2/26/2013 by Clyde from NRS
        • NRS Frame Casting Platform - Closeout

          Q:

          What is the hole in the casting platfor for?
          Asked on 1/14/2013 by Butch

          3 answers

          • VERIFIED BUYER

            A:

            The hole in the platform is tie a strap to one of the front D-rings on a raft. This gives you 3 points of contact.

            Answered on 1/14/2013 by Skipowpow from 5280, CO
          • VERIFIED BUYER

            A:

            Hi Butch,
            It’s to attaché to the front D- Ring for support.

            Answered on 1/14/2013 by Anonymous
          • VERIFIED BUYER

            A:

            Butch,
            I have seen this hole used for running a strap through it and supporting the platform from a D ring. My Aire does not have a ring where this works for me. I simply keep a boat cushion under both of my platforms to give it support and prevent wear on the floor. Hope this helps.
            Tim
            Sent from my iPad

            Answered on 1/14/2013 by Anonymous
        Displaying questions 1-3

        Do you have a question about this product?