Find NRS closer to home?

don’t show again

close

Summit 2 Valve Adapter

Item: 38541.01 | Product Description »

$6.00

  (10) | Write a Review | Ask a Question | 6 Questions

How many? @

$0.00
Please complete the required steps.

Check Availability

Orders over $75 ship for free!*

Summit 2 Valve Adapter for Summit 2 Valves.

This adapter has a blue ring to distiguish from the old.
Dimensions:
  • From tip to O-Ring: 13/16" L - 5/8" W
  • Width: 3/4"
Features:
  • Blue ring on adapter

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

6 Questions | 12 Answers
Displaying questions 1-6
  • Summit 2 Valve Adapter

    Q:

    this looks a little like the HR long valve adapter, any chance the caps fit into an old HR long valve?
    Asked on 5/29/2014 by TODDZILLA from split rock

    2 answers

    • Staff Reviewer

      A:

      Unfortunately, no, the prongs of the Summit 2 cap are shallower than the old HR Long Cap.

      Answered on 5/29/2014 by Clyde from NRS
    • VERIFIED BUYER

      A:

      Don't think that the 2 are interchangeable. I know that where the valves
      twist into the fitting has different spacing lengths (shaft length) so this
      one being a short valve, I don't think that it will twist into the older HR
      long valves.

      Answered on 5/29/2014 by Anonymous
  • Summit 2 Valve Adapter

    Q:

    Hello, i would like to know if the summit 2 valve adapter fits my ODC flats raider 9
    Asked on 5/4/2014 by lars from denmark

    1 answer

    • Staff Reviewer

      A:

      Lars, looking online I am unable to determine what valve is used on this boat. Take a look at our valve identification pages to see if one of our valve adapters will work - http://www.nrs.com/repair/valves.asp?tn=70

      Answered on 5/4/2014 by Clyde from NRS
  • Summit 2 Valve Adapter

    Q:

    Is this the adapter I need for the Tributary strike 2? thanks
    Asked on 7/5/2013 by Will from Missoul Mt.

    2 answers

    • Staff Reviewer

      A:

      Yes, Will, the Strike II uses Summit 2 valves.

      Answered on 7/5/2013 by Clyde from NRS
    • VERIFIED BUYER

      A:

      I have the Tributary Tomcat and it uses these Summit II adapters (with the blue washer). I checked AIRE's web site and the Tributary Strike also use the Summit II valves so this should work just fine.
      http://www.aire.com/aire/products/default.aspx?id=214

      Answered on 7/5/2013 by Anonymous
  • Summit 2 Valve Adapter

    Q:

    Will this fit my Fish Cat pontoon boat?
    Asked on 7/1/2013 by Bob the Yukoner from Whitehorse Yukon Canada

    3 answers

    • VERIFIED BUYER

      A:

      It worked out great for mine!

      Answered on 7/5/2013 by sean from eugene, OR
    • VERIFIED BUYER

      A:

      Depends on the year and model.
      Mike Taylor

      Answered on 7/1/2013 by Anonymous
    • Staff Reviewer

      A:

      Outcast's site says the Fish Cat has Summit II valves, so yes it will fit.

      Answered on 7/1/2013 by Clyde from NRS
  • Summit 2 Valve Adapter

    Q:

    I have a skeeter pontoon boat do you know if this the right adapter
    Asked on 6/10/2013 by none from mount vernon oregon

    3 answers

    • VERIFIED BUYER

      A:

      I use to have a Water Skeeter and that looks like the same valve adapter that I had.

      Answered on 6/12/2013 by Anonymous
    • Staff Reviewer

      A:

      Check our our valve identification pages to make sure you have the Summit valves in your boat - http://www.nrsweb.com/repair/valves.asp?tn=70

      Answered on 6/11/2013 by Clyde from NRS
    • VERIFIED BUYER

      A:

      It worked on mine. Good luck!

      Answered on 6/10/2013 by Anonymous
  • Summit 2 Valve Adapter

    Q:

    Does this adapter have a small plastic "cross-bar" (inside the adapter) that compresses the valve stem when connected to prevent immediate lose of air when disconnected?
    Asked on 3/14/2013 by Will from United States

    1 answer

    • Staff Reviewer

      A:

      Will, there's no crossbar inside the adapter and no need for one. The Summit valve has a spring loaded stem, with a rubber seal on the end. When you push down on the stem and turn it clockwise the rubber seal is raised to close the valve and prevent air from escaping. The valve adapter prongs lock the adapter in place, with that blue ring pressed against the valve opening to provide a good outer seal. As you pump, the air pressure pushes the inner rubber seal open, letting air into the chamber. When you stop pumping the rubber seal closes, trapping the air. So, as you remove the adapter, no air is escaping.

      Answered on 3/14/2013 by Clyde from NRS
Displaying questions 1-6

Do you have a question about this product? 

REVIEW SNAPSHOT®

by PowerReviews
Summit 2 Valve Adapter
 
4.5

(based on 10 reviews)

Ratings Distribution

  • 5 Stars

     

    (8)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

88%

of respondents would recommend this to a friend.

Pros

  • Easy to use (3)

Cons

    Best Uses

        • Was this a gift?:
        • No (9)

      Most Liked Positive Review

       

      functional and good

      had to replace a bladder and it came with a newer style vale - so had to also purchase the valve adapter - now need 2 different adapters to fill the boat (2 different...Read complete review

      had to replace a bladder and it came with a newer style vale - so had to also purchase the valve adapter - now need 2 different adapters to fill the boat (2 different valve types); but all is good, both valve styles new and old work correctly

      VS

      Most Liked Negative Review

       

      Maybe not the right kind

      I was excited to see an adapter that I could put in my valve and attach a tube to it for better inflation. I was also excited that I wouldn't need someone to hold...Read complete review

      I was excited to see an adapter that I could put in my valve and attach a tube to it for better inflation. I was also excited that I wouldn't need someone to hold the hose tube while I pumped with both hands. While the NRS site is very clear that this is "the new" design, I have no idea whether the valve in my boat is "the new" design or "the old" design. The boat instructions say that it is a Summit 2 valve. Because I haven't heard of a Summit 3 valve, I bought it and hoped for the best. Unfortunately, it didn't stay in the valve very well when I attempted to use it. It was far easier to have someone hold the tube while I pumped. It was cheap and worth a shot.

      Reviewed by 10 customers

      Sort by

      Displaying reviews 1-5

      Back to top

      Previous | Next »

       
      5.0

      Works like it should

      By Nate

      from Seattle, WA

      About Me Casual/ Recreational

      Verified Buyer

      Pros

      • Easy to Use
      • WORKS

      Cons

        Best Uses

        • Inflating My Ik

        Comments about Summit 2 Valve Adapter:

        Don't know what to say other than it works! No problems with it at all thus far.

        Service and delivery comments:

        Delivery was quick and as promised. Thank you NRS!

        • Was this a gift?:
        • No
         
        5.0

        Adapter Works great

        By Dale

        from Texas

        About Me Advanced

        Verified Buyer

        Pros

        • Easy to Use

        Cons

          Best Uses

            Comments about Summit 2 Valve Adapter:

            Works great with my ARE boat. Hands free with a piece of vinyl tubing from the local hardware store!

            • Was this a gift?:
            • No
             
            5.0

            Makes inflating my Tomcat easier

            By Burnt

            from Fort Collins, CO

            Verified Buyer

            Pros

            • Easy to Use

            Cons

              Best Uses

                Comments about Summit 2 Valve Adapter:

                This adapter makes a secure fit between my Wonder Pump and Trib. Tomcat. While the Wonder Pump has a connector that fits the valves, this one is much more secure, keeping the connection strong inspite of movement.

                It works great.

                 
                5.0

                A must have!

                By Tom

                from Redmond, Oregon

                Verified Buyer

                Pros

                • Good fit
                • Inexpensive
                • No air leaks
                • No holding required

                Cons

                • None

                Best Uses

                • Hand pump IK and raft

                Comments about Summit 2 Valve Adapter:

                I love it because I do not need to have a second set of hands and I get a better seal while inflating my entire IK with a barrel pump.

                • Was this a gift?:
                • No
                 
                5.0

                perfect fit quick ship

                By Handro

                from on the rouge

                Verified Buyer

                Pros

                  Cons

                  • No rubber tube to pump

                  Best Uses

                  • Filling raft

                  Comments about Summit 2 Valve Adapter:

                  Came fast fit friends boat from [@] that lost fill valve.

                  • Was this a gift?:
                  • No

                  Displaying reviews 1-5

                  Back to top

                  Previous | Next »