NRS Raft Fishing Frame

Item: 92013.04
  • Image for NRS Raft Fishing Frame
  • Alternate product image 92013_02_Right_111414
  • Alternate product image 92013_02_Front_111414
$1,145.00

SIZE
What Size do you need?
QUANTITY

Your order ships for free!*

Product Details

The secret is out, the word has spread, rafts can quietly take anglers to fishing holes other boats can't get to. The NRS Raft Fishing Frame includes a comfortable seat for the rower and puts the angler up high with a padded Swivel Seat.
  • This frame turns your raft into a fishing machine. The fully adjustable and adaptable NRS frame system lets you customize your Fishing Frame for the kind of fishing you're doing.
  • A full range of frame widths and lengths ensure a good fit for any size raft.
  • Hot-forged aluminum alloy LoPro™ Fittings are the heart of the NRS frame system, and allow complete adjustability for all frame parts.
  • NRS 8" Oar Mounts are lighter, sleeker and stronger than ever with hot-forged aluminum alloy construction and a nylon insert to reduce rowing friction.
  • Create your seat bars by U-bolting each Universal Seat Mount to a cross bar and the Angler Seat Bar. This allows you to precisely set the location of the seat and the seat angle.
  • Use at least four NRS Straps to secure the frame to your boat.
  • Components: Side Rails, Foot Bar, Universal Seat Mount, Angler Seat Bar with Universal Seat Mount, two Cross Bars, Low-Back Seat, High-Back Swivel Seat and 8" Oar Mounts.
  • NRS frame systems are the easiest frame systems on the market to customize. Add accessories like Thigh Bars, Casting Platforms, Thigh Hooks, a Stern Seat Mount, Anchor System, Stripping Baskets and Scotty® rod and accessory holders to improve your fishing experience.

Specs

Product Tips

Frame width is measured center to center of the side rails.

Category:
  • Raft Frames
  • Fishing Frames
Weight: 60" W is 52 lbs.
Material: Modular Anodized Aluminum Frame
Included Components:
  • 2 - Side Rails
  • 1 - Foot Bar
  • 2 - Cross Bars
  • 2 - Universal Seat Mounts
  • 1 - Angler Seat Bar
  • 1 - Low-Back Seat
  • 1 - High-Back Swivel Seat
  • 1 - Pair of 8" Oar Mounts
Suggested minimum amount of straps used to secure the frame. (Sold Separately): 4 (3' or 4' straps)

Product Instructions

  1. Lay out the frame parts as shown in the image above.
  2. Attach the Universal Seat Mounts to the center of one of the cross bars and the raised seat bar.
  3. Set all bars on the side rails and install the U-Bolts. Add the washers and nuts leaving them loose. If any of the bars need to be re-positioned, it may be necessary to remove the U-bolts to make adjustments.
  4. Add oar mounts and seats.
  5. Check to be sure that all of the U-bolts are tight. Periodically check the tightness of all nuts and bolts.

Reviews

Questions