NRS Rear Casting Platform

Rear Casting Platform Components:

  • (1) Pre-assembled Platform with bars
  • (2) Straight Hanger Bars
  • (4) U-bolts with Lock Nuts & Washers
  • (8) Washers and Locking Nuts
NRS Frame Casting Platform


  1. Install the U-bolts into the platform LoPros. It may be necessary bend the horns of the U-bolts so that they line up with the holes in the LoPros. This small amount of bending can usually be done by hand.

  2. Place the hanger bars onto the platform LoPros and add the nuts and washers, but don't tighten them yet.

  3. Position the platform in front of the cross bar.

  4. Once everything is lined up, install the U-bolts in the hanger bar LoPros and tighten all of the lock nuts.

  5. Thread a strap through the hole in the front of the platform and run it to a D-ring or other solid attachment point in front of the platform to help support the userís weight.
  6. To ensure the longevity of these and all frame parts, periodically check the tightness of all the nuts and platform bolts.

*Printable Casting Platform Directions

* Adobe Acrobat 3.0 is required to view printable directions

Download Acrobat Reader