NRS Outlaw IK 1" D-Ring PVC Patch
Item: 84031.02 | Product Details »
- Great accessory tiedown point for many outdoor uses.
- Stainless steel D-ring for long term corrosion-resistant service.
- Attach using Clifton Urethane Adhesive or Stabond Adhesive, or, to attach to fiberglass, metal and many plastics use G/flex Epoxy Adhesive.
- 4" diameter patch.
WARNING: This product can expose you to Di(2 - ethylhexyl)phthalate(DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. More about California Proposition 65 »
Extra D-rings provide more gear tie-down options, and footcups give you greater paddling control. NRS Repairs demonstrates the steps for gluing them so they stay permanently in place.
When repairing your Hypalon, PVC or urethane inflatable, or your plastic or composite kayak, it's vital that you choose the right adhesive and solvent for the job. Using the wrong materials will result in a poor repair and wasted effort. In this video, Josh from NRS Repairs shares an inflatable repair adhesives guide to help you understand when to use such glues as Clifton Hypalon, Shore, Stabond, Clifton Urethane, Vynabond and G/flex Epoxy. Solvents for repair prep are important too; you'll also learn when you can use toluene, MEK, acetone and alcohol.
It's important to master the skills and techniques of patching your urethane or PVC fabric inflatable boat. In this video the NRS Repairs Department goes over the step-by-step process for finding the leak, preparing the surface of the patch and boat, applying the glue and rolling on the patch. The use of Clifton Urethane Adhesive is demonstrated, but the same techniques work with Stabond Adhesive, Vynabond and other PVC/urethane-type adhesives. Using these methods you can also add D-rings, foot cups and wear strips to your boat.
|D-ring:||1" Stainless steel|
|Patch:||4" diameter PVC|