NRS Pennel Orca Doughnut Patch for Leafield Valve

Item: 38525.01
  • Image for NRS Pennel Orca Doughnut Patch for Leafield Valve


  • Alternate product image 38525_01_Blue_na_Top_030222

    Alpin Blue

  • Alternate product image 38525_01_Gray_na_Top_030222

    Artic Gray

  • Alternate product image 38525_01_DarkGreen_na_Top_030222

    Caraibe Green

  • Alternate product image 38525_01_NeptuneGray_na_Top_030222

    Neptune Gray

  • Alternate product image 38525_01_Red_na_Top_030222

    Etna Red

  • Alternate product image 38525_01_Yellow_na_Top_030222

    Yellow Colorado

  • Alternate product image 38525_01_Blue_na_ExplodedView2_030222
  • Alternate product image 38525_01_Group_All_Line_030222
What Color do you need?

Your order ships for free!*

Product Details

Use the Pennel Orca® Doughnut Patch for replacing the valves in any inflatable boat with Hypalon or other synthetic rubber-coated material.
  • To completely replace a valve you need to remove the inner portion and replace it with the new piece. The Doughnut Patch technique cleanly allows you to do that. See the linked "How to Replace a Raft Valve" for complete instructions.
  • This is an air-holding patch, so we strongly recommend using the combination of Clifton Hypalon Adhesive and Clifton Hypalon Accelerator for the job. This is the combo we use to build our Pennel Orca inflatables.
  • Patch diameter is 8 3/8" and the inner hole is 1 1/4".
  • If your boat has another type of material, make your own doughnut patch from that material and use the proper adhesive.


  • 8 3/8" diameter Pennel Orca Patch
  • 1 1/4" inner diameter hole
Weight: 0.7 oz
  • Repair Materials
  • Hypalon / Pennel Orca