• 877.677.4327
  • |
  • Customer Service
  • New Short H-R Fill Adapter

New Short H-R Fill Adapter

Item: 38501.01 | Product Description »

$4.50

  (11) | Write a Review | Ask a Question | 10 Questions

How many? @

$0.00
Please make the necessary selection(s) above.

Check Availability

Orders over $75 ship for free!*

Fill Adapter for the New Short Halkey-Roberts Valve.

REVIEW SNAPSHOT®

by PowerReviews
Halkey-RobertsNew Short H-R Fill Adapter
 
4.3

(based on 11 reviews)

Ratings Distribution

  • 5 Stars

     

    (7)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

80%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Was this a gift?:
    • No (10)

Most Liked Positive Review

 

Made it work for my BRAVO air compressor

I needed an adapter to use my BRAVO 12volt air compressor on my inflatable SUP to get to 15psi. The BRAVO came with adaptors but you have to hold them on the SUP air...Read complete review

I needed an adapter to use my BRAVO 12volt air compressor on my inflatable SUP to get to 15psi. The BRAVO came with adaptors but you have to hold them on the SUP air connection and it sometimes slips off and you cannot walk away while it pumps. I am able to put this adaptor on the pump and it fits securely on my SUP so I can now get other things ready while it pumps up.

I did have to modify the adaptor so it would compress the push valve on the SUP's air connector otherwise for the pump to get the air in, it would always go to stage two of high pressure and low volume and would heat up.

Where the adaptor's rubber ring gaskett is I drilled holes and put a 2mm aluminum rod cut to size. Now when you twist the adaptor on it pushes in on the push valve and allows the pump to work more effeciantly.

VS

Most Liked Negative Review

 

Doesn't work for my need.

I tried to use this adapter with my 12v pump to pump up an inflatable kayak (Aquaglide). But no air goes in the chamber unless the valve is open. Which means, of...Read complete review

I tried to use this adapter with my 12v pump to pump up an inflatable kayak (Aquaglide). But no air goes in the chamber unless the valve is open. Which means, of course, as soon as you disconnect the adapter, the air escapes.

The connector that came with the boat has a small bar in the middle that depresses the valve for filling. These do not.

Reviewed by 11 customers

Sort by

Displaying reviews 1-5

Back to top

Previous | Next »

 
5.0

Fits as described. Works well

By r1005

from Cary, NC

Verified Buyer

Pros

  • Solid construction

Cons

  • None

Best Uses

  • Adapt To Inflatable Sup

Comments about New Short H-R Fill Adapter:

Used to fill a Boardworks inflatable SUP. The pump supplied with the board is nearly useless
I used urethane glue to reduce the size of the attached tubing to the correct size to fit a Schrader valve from a tire inner tube. Now can connect to a bike floor pump or compressor.

  • Was this a gift?:
  • No
 
1.0

Doesn't work for my need.

By John

from LA, CA

Verified Buyer

Pros

  • Right Fitting

Cons

  • Inflate
  • With 12v Pump Won't Infla

Best Uses

    Comments about New Short H-R Fill Adapter:

    I tried to use this adapter with my 12v pump to pump up an inflatable kayak (Aquaglide). But no air goes in the chamber unless the valve is open. Which means, of course, as soon as you disconnect the adapter, the air escapes.

    The connector that came with the boat has a small bar in the middle that depresses the valve for filling. These do not.

     
    3.0

    Close but no cigar

    By BayouBill

    from Houston

    Pros

    • Good quality

    Cons

    • Does Not Open The Sup Val

    Best Uses

      Comments about New Short H-R Fill Adapter:

      This adapter is good quality and I like the grip that makes it easy to insert. Unfortunately there is no bar inside the adapter to press down on the SUPs valve stem to open it for inflation.

      • Was this a gift?:
      • No
       
      5.0

      Perfect

      By Connery

      from Arkansas

      Pros

        Cons

          Best Uses

            Comments about New Short H-R Fill Adapter:

            Works like a charm

            • Was this a gift?:
            • No

            (1 of 1 customers found this review helpful)

             
            4.0

            Made it work for my BRAVO air compressor

            By RG

            from Seattle, WA

            Verified Buyer

            Pros

              Cons

                Best Uses

                  Comments about New Short H-R Fill Adapter:

                  I needed an adapter to use my BRAVO 12volt air compressor on my inflatable SUP to get to 15psi. The BRAVO came with adaptors but you have to hold them on the SUP air connection and it sometimes slips off and you cannot walk away while it pumps. I am able to put this adaptor on the pump and it fits securely on my SUP so I can now get other things ready while it pumps up.

                  I did have to modify the adaptor so it would compress the push valve on the SUP's air connector otherwise for the pump to get the air in, it would always go to stage two of high pressure and low volume and would heat up.

                  Where the adaptor's rubber ring gaskett is I drilled holes and put a 2mm aluminum rod cut to size. Now when you twist the adaptor on it pushes in on the push valve and allows the pump to work more effeciantly.

                  • Was this a gift?:
                  • No

                  Displaying reviews 1-5

                  Back to top

                  Previous | Next »

                  Do you have questions about this product?

                  Get answers from real customers and in-house experts with AnswerBox.

                  10 Questions | 21 Answers
                  Displaying questions 1-10
                  • New Short H-R Fill Adapter

                    Q:

                    I have a Boardworks SHUBU iSUP. It has a H-R valve with markings: "H3" and "VB-V05-H3-2". The cover plug has a measurement of 21.4mm from the lower gasket surface to bottom end. Is this the correct adapter? Let me know if other measurements would help.
                    Asked on 6/23/2015 by Bob from Cary, NC

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Yes, Bob. That adapter will work for your H3 valve.

                      Answered on 6/24/2015 by Kyle from NRS
                  • New Short H-R Fill Adapter

                    Q:

                    I have both a two stage K-Pump and an old NRS Wonderpump(which still works well on Leafield valves after 15 plus years and occasional maintenance). I now own a SUP(Badfish MCIT) with the new short Halkey Roberts valves. My KPump has a universal adaptor which works but the pump has to be held perfectly straight to ensure a proper fit. The Wonderpump doesn't fit at all. Looking for advice in adapting Wonderpump for use in filling the SUP and for enhancing use of the KPump. Will this adapter work with either/both pumps and how do I attach it to my pump?
                    Asked on 11/30/2014 by Bob from Charleston, WV

                    2 answers

                    • VERIFIED BUYER

                      A:

                      It will work fine with the kpump. Had that valve and own a kpump. I just had to attach the adapter with a string so I wouldn't drop it in the water
                      Sent from my iPad

                      Answered on 11/30/2014 by Anonymous
                    • Staff Reviewer

                      A:

                      Yes, Bob, this adapter locks into the New Short and you should be able to adapt it to both of those pumps. The Wonder Pump won't be able to reach the high pressure your SUP requires, but your K-Pump should do the job.

                      Answered on 11/30/2014 by Clyde from NRS
                  • New Short H-R Fill Adapter

                    Q:

                    Hi - I own an Advance Elements hand pump. Do you know if this adapter will work with this? I am trying to fill up an inflatable paddle board made by Tower.
                    Asked on 6/30/2014 by Matt from Chicago

                    3 answers

                    • VERIFIED BUYER

                      A:

                      Sorry, I don't know as I do not have an Advanced Elements hand pump. It is
                      made to fit a Halky-Roberts valve though. -Mark.

                      Answered on 7/1/2014 by Mark from Seattle
                    • VERIFIED BUYER

                      A:

                      Hello,
                      I don;t know tower products, but there is a mini boston valve used on my
                      advanced elements kayaks. That valve you show is too tall for my kayaks.

                      Answered on 6/30/2014 by Anonymous
                    • CUSTOMER CARE

                      A:

                      Matt, this adapter will fit your pump and work to fill your SUP

                      Answered on 6/30/2014 by Kyle from NRS
                  • New Short H-R Fill Adapter

                    Q:

                    My air pump came with an adapter which looks like yours and snaps into my H-K valve but has no internal piece with which to depress the valve spring and allow air to enter. Does your adapter have such an internal valve spring depressor?
                    Asked on 9/22/2013 by chas from CO

                    7 answers

                    • VERIFIED BUYER

                      A:

                      No, the valve doe not have the cross piece you speak of. Have seen this on
                      some adapters, but the pump air pressure is enough to force air in and open
                      the valve. Works great.

                      Answered on 9/23/2013 by Anonymous
                    • VERIFIED BUYER

                      A:

                      It will work just fine.  Compressed air will push the valve spring down. 

                      Answered on 9/23/2013 by Shoot3r from Sealttle
                    • VERIFIED BUYER

                      A:

                      This adaptor may or may not push the spring depressor down, depending upon the height of the valve.  This adaptor twists onto the valve stem to secure it while you inflate through the valve and does sometimes push the depressor down so when you detach it, you have to immediately push on the depressor to stop air from escaping.   This was too long for my valves, so I had to use a hack saw and remove about 1/8" from the end and it fits my valves perfectly.  

                      Answered on 9/23/2013 by Anonymous
                    • VERIFIED BUYER

                      A:

                      No. You push and turn the valve before inserting the air pump adapter to keep it open for the initial fill, then close it when it feels full. Then top it off with the valve closed - the air pressure depresses it.

                      Answered on 9/22/2013 by Anonymous
                    • VERIFIED BUYER

                      A:

                      The valve is designed to allow air to enter without the internal spring being depressed. None of my adapters engage the spring. The spring is there for deflation purposes.
                      Cam
                      Sent from my iPad

                      Answered on 9/22/2013 by Anonymous
                    • Staff Reviewer

                      A:

                      Chas, sounds like you've got the right adapter for your H-K valve. The adapter doesn't have to push the plunger and spring down; the air pressure from the pump will push it down and let air in. Then when you quit pumping the valve will seal and hold the air in. Booyah!

                      Answered on 9/22/2013 by Clyde from NRS
                    • VERIFIED BUYER

                      A:

                      No there is nothing in the middle...
                      Sent from my iPhone

                      Answered on 9/22/2013 by Anonymous
                  • New Short H-R Fill Adapter

                    Q:

                    Just been issued with an Ark Angel rescue raft.
                    The inflation kit as delivered is a bit agricultiral.
                    Seeking to fit manifold to inflat 2 chambers at a time.
                    So how do I identify whether HR valves are old or new style?
                    Asked on 7/10/2013 by See address from Baulkham Hills NSW

                    1 answer

                  • New Short H-R Fill Adapter

                    Q:

                    Hello, We have a 10' [ water skeeter ]1 man pontoon raft with hr valves, Q Will this adapter work ? It looks similar to the one we lost..Thanks
                    Asked on 6/17/2013 by John from Kennewick WA.

                    2 answers

                    • Staff Reviewer

                      A:

                      John, the New Short is the only current Halkey-Roberts valve, but they made others previously. Use our H-R valve ID page to determine the right adapter - http://www.nrsweb.com/repair/hrvalves.asp

                      Answered on 6/17/2013 by Anonymous
                    • VERIFIED BUYER

                      A:

                      I know this adapter works with the Fish Cat "Cataraft" I own. There are two adapter that are very similar. One will work with both valve, one with only it's own design. Buy a couple of extra ones and use a key ring to secure it to the frame of your raft. People will "borrow" them if they get a chance. RB
                      Sent from my iPhone

                      Answered on 6/17/2013 by Anonymous
                  • New Short H-R Fill Adapter

                    Q:

                    When? it is a piece of plastic how can you run out of them?
                    Asked on 5/25/2013 by ARATA HAWAIIAN STYLE from BIG SKY, MONTANA

                    1 answer

                    • Staff Reviewer

                      A:

                      We are expecting delivery soon, as early as next week. We don't manufacture this product so are at the maker's mercy for delivery. Sorry for the inconvenience.

                      Answered on 5/27/2013 by Clyde from NRS
                  • New Short H-R Fill Adapter

                    Q:

                    Hi, I've looked through your reference guide for valves but am still a bit uncertain. My "Halkey Roberts" type valve looks like the new short, but is only stamped with "H3" Is this the new short the correct adapter? Thanks
                    Asked on 3/11/2013 by dsrtdady from United States

                    1 answer

                    • Staff Reviewer

                      A:

                      Hi, unless the valve matches the characteristics shown on this page - http://www.nrsweb.com/repair/hrvalves.asp - it's not a Halkey-Roberts New Short. Please check with the boat's manufacturer to determine what kind of valve you have. If that doesn't work, send us photos of the valve and we'll try to help identify it.

                      Answered on 3/11/2013 by Clyde from NRS
                  • New Short H-R Fill Adapter

                    Q:

                    will this work with the bravo valves on a Scadden Rampage?
                    Asked on 3/5/2013 by mike from seattle

                    2 answers

                    • VERIFIED BUYER

                      A:

                      Looks like that will be the fitting for your Rampage. I am only going on
                      pictures, but it looks like the standard inflatable short valve on your
                      Rampage. I have a small Mercury inflatable that had a one-off ex-short
                      valve.
                      Good luck, Charlie

                      Answered on 3/6/2013 by Anonymous
                    • Staff Reviewer

                      A:

                      Hi Mike, I really can't say since I don't have one of those valves here to try the adapter in. You can check out the adapter's measurement here - http://www.nrsweb.com/repair/hrvalves.asp - It's no-risk to get it; you can easily return it if it doesn't work.

                      Answered on 3/6/2013 by Clyde from NRS
                  • New Short H-R Fill Adapter

                    Q:

                    Will this work for Innova Sunny?
                    Asked on 10/28/2012 by Mo from 1123

                    1 answer

                    • Staff Reviewer

                      A:

                      First we need to find out what valve you have in your boat. Please take a look at our valve identification page - http://www.nrsweb.com/repair/valves.asp?tn=70 - to see if you have the H-R New Short.

                      Answered on 10/28/2012 by Clyde from NRS
                  Displaying questions 1-10

                  Do you have a question about this product?