Find NRS closer to home?

don’t show again

close

Carlson Pump Rubber O-ring

Item: 80044.01 | Product Description »

$8.00

  (2) | Write a Review | Ask a Question | 1 Question

What SIZE do you need?

How many? @

$0.00
Please complete the required steps.

Check Availability

Orders over $75 ship for free!*

Replacement O-Ring for the 4" or 6" older model Carlson Hand Pumps. Carlson used the Rubber O-Rings pre 2004. If your pump has a green hose, it is an older model and should utilize the Rubber O-Rings.

Product Reviews

  (2)

More Information

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 5 Answers
Displaying question 1
  • Carlson Pump Rubber O-ring

    Q:

    How do you lubricate an older Carlson pump/ eith an O ring?
    Thanks
    Drmcfadden@aol.com
    Asked on 7/15/2013 by David from Santa Rosa ca

    5 answers

    • VERIFIED BUYER

      A:

      Pull up on the pump handle until it comes off. There is a round plate
      there with an rubber o-ring around it. Put grease (waterproof grease
      recommended) around the top of the pump tube, and some on the ring itself.
      Carefully place the o-ring evenly around the plate, try the pump slowly,
      and if it works it works. If not, the o-ring has slid off and you have to
      place it on again. Having it slide off is not unusual and it will take
      several attempts. Well, if you're me, more than several. Not sure if that
      answers your question.
      -John Markey ****@***.***

      Answered on 7/15/2013 by Anonymous
    • VERIFIED BUYER

      A:

      I use the same grease as I use for my trailer bearings. Clean it out
      inside, then rub some grease around.

      Answered on 7/16/2013 by Anonymous
    • VERIFIED BUYER

      A:

      Go to the NRS website and order some k-pump super lube. I have an older
      Carlson and its like new.

      Answered on 7/15/2013 by Anonymous
    • Staff Reviewer

      A:

      David, use blue marine lithium grease. If you can't find that, use the white lithium grease.

      Answered on 7/15/2013 by Clyde from NRS
    • VERIFIED BUYER

      A:

      Marine grease
      Sent from my iPhone

      Answered on 7/15/2013 by Anonymous
Displaying question 1

Do you have a question about this product? 

REVIEW SNAPSHOT®

by PowerReviews
Carlson Pump Rubber O-ring
 
5.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

 
5.0

Saved me a bundle!

By Wildh2o

from Littleton, Colorado

Verified Buyer

Pros

  • Affordable
  • Easy to install

Cons

    Best Uses

    • Rafting

    Comments about Carlson Pump Rubber O-ring:

    I bought this O-ring to rejuvenate a non-functional barrel pump --- an essential part of my rafting gear. Instead of having to buy a new pump for $$$ I took off the top of the pump (one screw), retrieved the broken O-ring, and slipped on the new one. I replaced the screw holding the top and, voila, a fully functional pump. Love it! Based on my experience you'll only need to do this every 10 years or so because Carlson products are extraordinarily well built.

    • Was this a gift?:
    • No
     
    5.0

    Works like it is supposed to

    By Matt

    from Denver, CO

    Verified Buyer

    Pros

      Cons

        Best Uses

          Comments about Carlson Pump Rubber O-ring:

          Don't forget to lubricate your pump well when you replace the O-ring or it won't work correctly.

          • Was this a gift?:
          • No

          Displaying reviews 1-2

          Back to top