NRS Stern Raft Frame

Item: 92007.04
  • Image for NRS Stern Raft Frame
  • Alternate product image 92007_02_Right_123114
  • Alternate product image 92007_02_Front_123114
$625.00

SIZE | Size Chart
What Size do you need?
In Stock & Ready to Ship!
QUANTITY

Your order ships for free!*

Product Details

Easily navigate the raft from the back with the NRS Stern Frame, and leave the muscle to the paddle crew up front. This frame is fully adjustable to fit the height of your raft's stern tube.
  • Small size fits boats with 60" or less center-to-center measurement of the side tubes. The Large size works with boats larger than that 60" c-to-c measurement.
  • Adjust the seat, foot bar and oar mounts to customize the rowing station to fit your needs.
  • Hot-forged aluminum alloy LoPro™ Fittings are the heart of the NRS frame system, and allow complete adjustability for all frame parts.
  • NRS 10" Oar Mounts are lighter, sleeker and stronger than ever with hot-forged aluminum alloy construction and a nylon insert to reduce rowing friction.
  • Use NRS Tie-Down Straps to secure the frame to your boat.
  • Components: Side Rails, Universal Seat Mount, Cross Bar, Foot Bar, Low-Back Seat and 10" Oar Mounts.
  • The Stern Frame with Quad-Grip Seat (Item # 92009.03) is popular with outfitters who stack their boats with frames on.

Specs

Category:
  • Raft Frames
Weight: Large is 27 lbs.
Material: Modular Anodized Aluminum Frame
Included Components:
  • 2 - Side Rails
  • 1 - Foot Bar
  • 1 - Cross Bar
  • 1 - Universal Seat Mount
  • 1 - Low-Back Seat
  • 1 - Pair of 10" Oar Mounts
Suggested minimum amount of straps used to secure the frame. (Sold Separately): 3 (4' straps)
Stern Frame
Size A B C D
Small 36" 30" 62" 10"
Large 36" 44" 78" 10"

Product Instructions

  1. Lay out the frame parts as shown in the image above. (Note: These bent rails are asymmetrical; please make sure to match the similar ends of these side rails when connecting them to the seat and frame cross bar.)
  2. Attach the Universal Seat Mount to the center of the seat rail.
  3. Set the side rails on the seat rail and foot bar and install the U-bolts. Add the washers and nuts leaving them loose. If either of the bars need to be re-positioned, it may be necessary to remove the U-bolts to make adjustments.
  4. Add the seat and oar mounts.
  5. Tighten all of the U-bolts. Periodically check the tightness of all nuts and bolts.

Reviews

Questions