NRS Barrel Pump Handle and Shaft

Item: 80091.01 | Product Description »


  (1) | Write a Review | Ask a Question | 2 Questions

How many? @

Please complete the required steps.

Check Availability

Orders over $75 ship for free!*

Replacement Handle and Shaft for the 5" NRS Barrel Pump.

Product Reviews


Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

2 Questions | 3 Answers
Displaying questions 1-2
  • NRS Barrel Pump Handle and Shaft


    Could I use this to replace the broken handle and shaft on my newer style 4" carlson pump?
    Asked on 8/20/2013 by Pat from Montana

    1 answer

    • Staff Reviewer


      No, Pat, it's a different bird. Give us a call, 800.635.5202, for help in getting a new handle.

      Answered on 8/20/2013 by Clyde from NRS
  • NRS Barrel Pump Handle and Shaft


    Is there a way to connect the piston to the shaft without using glue? Or is that the best option and if it is what kind of glue would work best?
    Asked on 8/7/2013 by Bee from Nampa ID

    2 answers



      The piston will fit into the shaft firmly, however the action of pumping,
      combined with the friction created, and the piston topping out on the top
      cap of the barrel, will inevitably cause the two pieces to seperate. I used
      Gorilla Glue to combine my pieces, obviously after you place the shaft
      through the center of the top cap.
      Gorilla glue, as it says on the package instructions, reacts to water
      intitally, expands, and hardens into a very stiff and water proof
      composition. So spritz the shaft and ensure both surfaces are clean. Place
      a bead of GG throughout the female piece on the piston, place them
      together. Voila.
      You can somehow rig clamps to hold the pieces together, but I just put the
      whole pump together with the shaft in the lowermost position to hold it
      steady. It has been a gem every since.
      Hope this helps,
      Bay bay.

      Answered on 8/8/2013 by Anonymous
    • Staff Reviewer


      It's designed to be a glued joint. We use PVC cement, same stuff you can get at a hardware store for gluing home plumbing joints on plastic pipe.

      Answered on 8/8/2013 by Clyde from NRS
Displaying questions 1-2

Do you have a question about this product? 


by PowerReviews
NRS Barrel Pump Handle and Shaft

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top


Trouble with compatibility


from SLC

Verified Reviewer



      Best Uses

        Comments about NRS Barrel Pump Handle and Shaft:

        Handle is glued to the shaft so you cannot remove it to replace the handle only. In my pump, the shaft is glued into the plunger so I couldn't remove it to install this part. There is a handle sold separately but since it was the same price I thought I would get both the handle and shaft so I would have more options, but ultimately was left with a combination of parts that were incompatible. The only thing I could figure out to make the new handle work with the old plunger was to cut both shafts and splice them together but even that didn't work because the replacement parts use thicker wall pvc - which is good, but now I'm stuck with a lot of broken parts that won't fit together.
        Maybe it was user error but better instructions or information about the replacement part options would have been helpful.

        • Was this a gift?:
        • No

        Displaying review 1

        Back to top